Polypropylene (Impact, heat and flex)

Polypropylene has a tensile strength of 4,500-6,000 psi, an elongation of 1-600% and an izod impact of 2.2-no break at all. For the best simulator of these properties, Hapco would recommend using Hapflex 666 or Hapflex 671. Both products come in slow and fast gel times and are available in a flame retardant version.

ABS (Impact resistance)

ABS has a tensile strength of 5,500-7,500 psi, an elongation of 5-25% with a flexural strength of 11,000 – 13,000 psi. Hapco’s Tuffalloy™ Series is a great candidate for simulation of ABS. You might also consider Ultralloy 109 or Hapflex 671, both of which have exceptional mechanical properties.

High-Temperature “Rubber” (heat resistance)

Hapflex™ 666 has a heat deflection temperature of 110°C and a service temperature of 135°C and Hapflex 671 has an HDT of 130°C and service temperature as high as 150°C (300°F). These would be our best recommendations for a semi-flexible product with high heat resistance.

Nylon 6-6 (Bearing and roller-type parts/gears)

Nylon comes in a variety of types, with each different type having a variety of grades. On average, it has a tensile strength of 7,500-11,000 psi, and an elongation of 30-100% with an izod impact of .6-2.2. Ultralloy 200 Series or Hapflex 671 would compare favorably to Nylon. By adding 20-25% milled glass to the products, you can make them very strong.

Polycarbonate (High impact with some flexibility)

Polycarbonate has a tensile strength of 9,000-10,500 psi with an elongation of 110-120% and a flexural strength of 12,500-13,500 psi. For simulating this product we would recommend using Hapco’s Ultralloy 200 Series, Ultralloy 900 Series or the Tuffalloy Series. Ultralloy 912 has exception impact strength, high HDT and is rate UL 94V0 @ .125” thick.

Polystyrene (Like polycarbonate but cheaper in production)

Polystyrene has a tensile strength of 5,200-7,500 psi, an elongation of 1.2-2.5% and flexural strength of 10,000 to 14,000 psi. For simulating this material we would recommend using Hapco’s Ultralloy 108 or 109.

Santoprene (rubber parts)

Santoprene is a thermoplastic rubber that comes in hardnesses ranging from 35 Shore A to 50 Shore D. IT exhibits good resistance to fatigue and has high tear strength. It also has good chemical resistance to many acids and aqueous solutions and performs well in thermo-cycling applications. For simulating these characteristics we would recommend the entire Hapflex™ Series which ranges from a 25A to 70D in hardness.

 

100% Mercury Free

All of Hapco's formulations are completely free of Mercury.

RoHS Compliant

All of Hapco's products are in compliance with Directive (EU) 2011/65.

ISO Certified

Higher Quality. More Efficiency.
View Certificate

Technical Expertise

Hapco's employees are knowledgeable and ready to help.

Join Our Mailing List

Get the latest news, updates, and articles from Hapco, Inc.
Join Now